Filter
Top Products
SKU 02948 For technical questions, please call 1-800-444-3353. Page 3
SPECIFICATIONS
Maximum Trailer Payload 1,000 Pounds
Hitch Coupler Requirements Class 1 / 1200 Pounds Load Capacity /
2-1/2” Tongue / 1-7/8” Ball
Overall Dimensions 82” L x 51-1/8” W x 30-1/2” H
Trailer Bed Dimensions 55” L x 35” W x 1/2” Thick
Front/Side Panels/Tail Gate Height 12-7/8” High
Axle (w/Spindles) Dimensions 47-1/2” L x 1-5/8” W x 1-1/2” H
Wheels/Rims Dimensions 3.75” J x 8” Diameter
Tire Requirements 4.80/4.00-8 / Load Range: B
Tubeless Nylon; * Maximum Tire Load
Capacity = 590 lb. At 60 PSI
Tail Lights 12 Volt DC / D.O.T. Approved
Weight 195 Pounds
Note: Gross Vehicle Weight Rating = 1,000 lb., Gross Axle Weight Rating = 1,080 lb. Gross
Vehicle Weight Rating assumes an even load weight distribution on the trailer bed.
Uneven load distribution may result in exceeding individual tire maximum weight
capacity and additionally may cause instability on trailer during cornering.
Save this Manual
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
KEEP WORK AREA CLEAN AND DRY. Cluttered, damp, or wet work areas invite
injuries.
KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle
this product.
STORE IDLE EQUIPMENT. When not in use, tools and equipment should be stored
in a dry location to inhibit rust. Always lock up tools and equipment, and keep out
of reach of children.
DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS. Read warning labels on prescriptions to determine if your judgement or
reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this product.
USE EYE PROTECTION. Wear ANSI-approved safety impact eye goggles when
assembling this product. ANSI-approved safety impact eye goggles are available
from Harbor Freight Tools.
1.
2.
3.
4.
5.