Filter
Top Products
7308–287
Maintenance
CAUTION
Do not immerse the meter in solvent. Solvent could
damage the meter
’
s electrical components.
1.
Clean the fluid and air line filters daily
.
2.
Clean the outside of the meter with a soft cloth
dampened in a compatible solvent as needed.
3.
Flush the fluid supply line and meter fluid reservoir
daily with a compatible solvent as instructed at
right.
Flushing the Meter
WARNING
To
reduce the risk of serious injury whenever you
are instructed to relieve pressure, always follow the
Pressure Relief Procedure
on page 6.
1.
Relieve the pressure.
2.
Connect the fluid line to the solvent supply unit.
3.
Flush the meter until it is clean.
4.
Relieve the pressure
, then disconnect the fluid
line from the solvent supply unit.
5.
Reconnect the fluid line to the fluid (paint) supply
.
6. T
urn on the fluid supply
.
7.
Operate until the meter and fluid line are free of
solvent.