Filter
Top Products
308351 7
Installation
All Systems
NOTE: Reference numbers and letters in parentheses
in the text refer to the callouts in the figures and parts
drawings.
The Typical Installations shown in Figs. 3 and 4 are
only guides for selecting and installing system compo-
nents and accessories. Contact your Graco distributor
for assistance in designing a system to suit your
particular needs.
Accessories are available from Graco. If you supply
your own accessories, be sure they are adequately
sized and pressure–rated to meet the system’s re-
quirements.
System Accessories
Air and Fluid Hoses
Be sure all air hoses and fluid hoses are properly sized
and pressure-rated for your system. Use only electri-
cally conductive hoses. Fluid hoses must have spring
guards on both ends.
Mounting Accessories (Except 198466, 198475 and
246938)
Mount the pump (A) to suit the type of installation
planned. Fig. 3 on page 8 illustrates a ram-mounted
pump in a multi-gun header system. Pump dimensions
and the mounting hole layout are shown on page 49.
If you are mounting the pump on a ram, refer to the
separate ram manual for installation and operation
instructions. Mounting Kit 222776 is available to mount
the pump on a 55 gallon (200 liter) ram.