Filter
Top Products
Rear Seats
Rear Seat Operation
The second row seat is a 65/35 split seat which may be
folded and tumbled as well as reclined. Use the fold
and tumble feature for gaining access to the rear
compartment when using the midgate. Pull up on the
lever marked 1 to recline the seatback.
To fold and tumble the second row seat(s),
do the following:
1. Push the head restraints fully down.
2. Fold the seatback flat on the seat by pulling up on
the front part of the lever. The lever is located on
the outboard side of the seatback and is indicated
as 1 on the side of the seatback and on the lever.
3. Release the rear set of seat hooks from the floor
pins by pulling up on the rear part of the lever
indicated as 2 on the side of the seatback and on
the lever. This enables the seat to be tumbled
forward.
Returning the Seats to an Upright Position
To return the seat(s) to the upright position,
do the following:
1. Pull the lever found near the lower outboard side of
the seat cushion forward.
2. Rotate the seat down to reengage the seat hooks.
3. Try to raise the seat to check that it is locked down.
4. Pull the seatback up to return it to the upright
position.
1-6