Filter
Top Products
Voice Tag Commands
The following are voice tag commands that can be
accessed by clearly stating the commands exactly as
they are written. There can be up to 40 voice tag entries
for destinations.
Navigation go to [destination], navigation select:
These commands instruct the system to select a
destination saved under the stored voice tag. The
system prompts for a destination name then waits for
the name to be stated.
If you are not currently driving on a route, the system
automatically creates the voice tag destination as the final
destination. If you are currently driving on a route, the
system automatically creates the voice tag destination as
a stopover. Up to three stopovers can be created.
Storing Voice Tags
From the address book entry information page, press
the Add Voice tag screen button. The system responds
“Name Please?” and you will have four seconds to
record a name. The system asks for confirmation of the
name before saving it as a voice tag.
Navigation Help
Navigation Help: This command instructs the system
to assist with navigation commands.
Display Commands
To set the display mode:
Display [set] day [mode]: Sets the display to
daytime mode.
Display [set] night [mode]: Sets the display to
night mode.
Display [set] auto [mode]: Sets the display to
automatic mode. The system changes between day
and night mode automatically.
System help: This command instructs the system to
assist with display commands.
Radio Commands
The following are radio commands can be accessed by
clearly stating the commands exactly as written.
Radio [band] [select] AM, radio [band] [select] FM,
radio [band] [select] XM, radio [band] [select]
satellite: Instructs the system to go to either the AM,
FM, or XM™ (if equipped).
Radio [select] (frequency) AM, radio [select]
(frequency) FM: Instructs the system to go to a specific
frequency on either AM or FM.
4-3