Filter
Top Products
It will also display turn-by-turn
navigation information if the vehicle
has a navigation radio. The images
are projected by the HUD lens
located on the driver’s side of the
instrument panel.
The tap shift gear will also appear
on the HUD if the vehicle has tap
shift and it is active.
The HUD information can be
displayed in one of three languages,
English, French, or Spanish.
The speedometer reading and
other numerical values can be
displayed in either English or
metric units.
The language selection and the
units of measurement are changed
through the trip computer in the
Driver Information Center (DIC).
See DIC Vehicle Customization
(With DIC Buttons) on page 3-67.
The HUD information appears as an
image focused out toward the front of
the vehicle.
When the ignition key is turned to
ON/RUN, the HUD will display an
introductory message for a short
time, until the HUD is ready.
The following indicator lights
come on the instrument panel
when activated and also appear
on the HUD:
• Turn Signal Indicators
• High-Beam Indicator Symbol
The HUD temporarily displays
CHECK GAGES and ICE POSSIBLE
when these messages are on the
DIC trip computer.
The HUD also displays the following
messages on vehicles with these
systems, when they are active:
• TRACTION CONTROL ACTIVE
• STABILITRAK ACTIVE
Notice: If you try to use the
HUD image as a parking aid, you
may misjudge the distance and
damage your vehicle. Do not use
the HUD image as a parking aid.
HUD Display on the Vehicle
Windshield
Instrument Panel 3-17