Filter
Top Products
Ejecting the DVD Map Disc
The navigation portion of the system cannot be used if
the DVD map disc is not loaded.
1. Press the MENU key to enter the Menu options,
then press the MENU key repeatedly until Nav is
selected or touch the Nav screen button.
2. Touch the Map Database Information
screen button.
3. Touch the Eject Map Disc screen button. The
screen tilts, exposing the map DVD slot.
4. Press the eject button, located next to the DVD map
disc slot, and the disc ejects. Pull the disc out.
The screen cannot be closed until a double beep is
heard.
Notice: Pressing directly on the navigation screen
may cause damage. Repairs would not be covered
by the vehicle’s warranty. Do not press directly
on the navigation screen.
5. To close the screen, slightly push up on the two
outer corners until the screen is in position. Then
push the screen in by pushing on the four outer
corners until a click is heard.
Handling the DVD Map Disc
To properly handle the DVD map disc:
• Handle the disc very carefully to avoid
contamination or flaws. Signals may not read out
properly if the disc gets contaminated or flawed.
• Do not use photographic record cleaner, solvents,
or other cleaners if the disc gets soiled. Use a soft
cloth to gently wipe it out from the center of the
disc to the outside.
• Do not use the disc to rest on while writing or
drawing with any writing utensil. Do not attach
a seal to the disc.
• Do not keep the disc in direct sunlight, high
temperatures, or humidity.
• After using the disc, place it back into the
original case.
2-5