Filter
Top Products
6. Line up the tabs on the bulb socket with the gaps in
the socket holes and screw the bulb socket back
into the lamp housing. You will hear a click.
7. To reinstall, align the pins on the back of the lamp
with the sockets on the outboard side of the lamp
opening.
8. Push forward until the pins snap into the socket.
9. Reinstall the screws removed in Step 2.
Replacement Bulbs
Lamp Bulb Number
Back-up Lamps (Bottom) 3155K
Headlamps High-beam 9005
Headlamps Low-beam 9006
Front Turn
Signal/Parking/Sidemarker Lamps
3057
Stop/Taillamps (Top) 3057K
5-55