Filter
Top Products
Removing the Sliding Rear
Convenience Tray
1. Make sure that all items have been removed from
the top and the inside of the sliding rear
convenience tray.
2. Push down on the release lever and pull the tray fully
rearward onto the tailgate until you hear a click.
3. Disconnect the tethered
ring from the hook and
place the tethered
ring on the outer edge
of the tailgate on
each side of the
vehicle.
4. Push down on the release lever and roll the tray
into the vehicle approximately 6 inches (15.24 cm).
5. Use the handle to lift up on the tray while pulling it
towards you. Use your other hand to support and
lift the tray from the bottom. Remove the tray
from the vehicle.
The rear of the tray has rollers for you to move it on the
ground, in an upright position, without having to carry it.
2-44