GM 2000 Automobile User Manual


 
1-40
In order to get to one of these brackets, you’ll have to
open the trim cover. When using a top strap
-equipped
child restraint in a rear outboard position, be sure to
route the top strap under the head restraint.
The top strap anchor for the center rear seating position
is located at the top of the seat. In order to get to this
bracket, you’ll have to unzip the seat cover.
Anchor the top strap to this bracket. Once you have the
top strap anchored, you’ll be ready to secure the child
restraint itself.
Securing a Child Restraint in a
Rear Seat Position
You’ll be using the lap-shoulder belt. See the earlier
part about the top strap if the child restraint has one.
Be sure to follow the instructions that came with the
child restraint. Secure the child in the child restraint
when and as the instructions say.
1. Put the restraint on the seat.
2. Pick up the latch plate, and run the lap and shoulder
portions of the vehicle’s safety belt through or
around the restraint. The child restraint instructions
will show you how.