Filter
Top Products
3-43
Use the network panel to configure your PDA to
work with your Internet Service Provider (ISP).
Consult the information provided with your PDA and
e
-mail/browser applications for details. You may need to
contact your ISP for your Domain Name Service (DNS).
The e-mail application you choose will require a POP3
and SMTP host, user identification and password.
You may need to contact your ISP for the information
required to complete the setup.
Palm PC Products
Your Palm PC will allow you to send and receive e-mail.
You will need to obtain a browser if you plan to access
the world wide web (www). You can find a browser for
your Palm PC at www.windowsce.microsoft.com
.
If your Palm PC uses Windows CE, create a connection
by following these steps:
1. Click on Start.
2. Click on Programs.
3. Click on Communications.
4. Click on Connections.
5. Double click on the Make New Connection icon.
6. Select Dial Up Connection, then Next and Configure.
Under the Port Settings tab, make the following selections:
Baud rate 4800,
Data bits 8,
Parity None,
Stop Bits 1 and
Flow Control Hardware.
Next select the Call Options tab and clear the box labeled
“Wait for dial tone before dialing” and select OK.
Select the TCP/IP settings to configure your Palm PC
to work with your ISP. Consult the documentation
provided with your PDA and browser application for
details. You may need to contact your ISP for your
Domain Name Service (DNS).
To complete the setup follow these steps:
1. Click on Start.
2. Click on Programs.
3. Click on Inbox.
Then using the menu bar at the top of the screen:
4. Click on Compose.
5. Click on Options and select the Services tab.