Filter
Top Products
will cause a "beep." Pay particular atten-
tion to the size of each target as indicated
when you press and hold the TREASURE
IMAGING touch pad.
2. Use the MENU/SCROLL and (+) or (--)
touch pads to select the Coins detection
mode. Then press OPERATE. Bring the
same targets across the bottom of the
searchcoil and listen for a "beep" when the
various items are scanned. Notice where
the Target Cursor darkens in the Upper
Scale of the Graphic Display when particu-
lar targets are scanned across the coil.
3. Perform the same tests with the other
modes and observe the sounds, Upper
Scale indications and sizes when the
TREASURE IMAGING touch pad is pressed
and held.
4. Begin to experiment with the ACCEPT
and REJECT touch pads. Notice carefully
which of the segments are illuminated as
you identify various targets.
5. Be methodical. Keep written records of
results and use them when hunting.
52 - Garrett Metal Detectors