Filter
Top Products
side of the diagram and the horizontal
color-coded lines connecting them. These
refer to the five relative sizes at the bot-
tom of the Display Screen.
Relating conductivity and size to help
determine your target before digging it
is a unique feature of the GTI. The target
cursor on the Upper Scale, which indicates
the target's conductivity, will blink as you
pinpoint a target and learn its size, as
indicated at the bottom of the Display
Screen. The blinking cursor will indicate
the last target discovered before the
TREASURE IMAGING (Pinpoint) touch pad
was pressed.
Thus a "B-size" target with a coin's con-
ductivity as indicated on the Target ID
Guide will most likely be a coin.
Because continued practice in relating
size and conductivity will help you identify
targets before you dig them, you will dig
more treasure and less trash.
20 - Garrett Metal Detectors