Filter
Top Products
Treasure Imaging (Pinpoint)
Press and hold this touch pad to put
your detector into a Treasure Imaging
(Pinpoint) mode so that you can locate
your target more precisely and also deter-
mine its relative size and depth. Size will
be shown at the bottom of the Display
Screen, as shown above. Since you have
a B-size target and your Target Cursor is
blinking at 9+, you have probably found
a quarter.
Pinpointing and sizing through TREASURE
IMAGING can be an invaluable aid to trea-
sure hunting when used properly.
To turn OFF your detector: Simply press
and release the POWER touch pad. Charles
Garrett recommends that you first become
familiar with your new detector by hunting
for at least 10 hours in the factory preset
24 - Garrett Metal Detectors