Filter
Top Products
on. If it is showing, pressing this pad will
turn it OFF.
Remember: When you press the ACCEPT/
REJECT touch pad, you cause the dis-
crimination circuit to reject a target that is
shown on corresponding segments of both
the Lower and Upper Scales. This rejection
will be indicated by the disappearance of a
Lower Scale segment.
The same touch pad is used to cause
the detector to accept a target. When
such a desired target is being shown by
the cursor but not the corresponding
Discrimination Segment below, press the
ACCEPT/REJECT touch pad. The segment
will be turned ON and appear, indicating
that your desired target will now cause a
"beep."
Note: It is important to remember that
each time the detector is turned OFF
ACCEPT/REJECT selections will be retained
only in the Custom mode. Any ACCEPT
/ REJECT modifications you have made
in the preset Coins, Jewelry, Relics and
Zero modes will be lost, since these four
44 - Garrett Metal Detectors