Filter
Top Products
2 Trail Guide
™
Owner’s Manual
E
N
GettInG started > tutorIal
Tutorial
This tutorial guides you through the steps for nding a restaurant
in your area and then creating a route to it. If you have never used
a GPS unit before, try this simple task. You will see that using your
Trail Guide is fast and easy.
Make certain the antenna is unobstructed as it looks for satellites.
For example, it cannot establish a satellite x if your vehicle is
parked in a garage. Position the antenna so that it is parallel to
the surface of the road so that it can have the best view of the sky.
Step 1: If you have not already done so, ip up the antenna and
snap your Trail Guide into the vehicle mount. See page 4 if you
need additional instructions. Turn on the Trail Guide. When the
unit has established a satellite x, it displays a “Ready to Navigate”
message.
Step 2: Press FIND. The Find menu appears. Highlight the Food
& Drink icon located in the Find menu, and press OK.
FIND key
Rocker key
OK key
Step 3: A list of restaurants in your area appears. Use the Rocker
key to highlight a restaurant in the list. Then press OK.
Use the Rocker key to
highlight a restaurant.
Map page