Garmin 680 GPS Receiver User Manual


 
36 nüvi 680 Owner’s Manual
cUStoMizinG the nüvi
Screen Shot—enable Screen Shot mode.
Quickly press and release the Power
button to take a screen shot. The picture
bitmap le is saved in the Garmin\scrn
folder on the nüvi drive.
NOTE: When Screenshot is On, the
Quick Settings screen does not open
when you tap the Power button.
Restore—restore the original display
settings.
Changing the Navigation
Settings
On the Menu page, touch >
Navigation.
Route Preference—select a preference
for calculating your route. Select Faster
Time
to calculate routes that are faster
to drive but can be longer in distance.
Select Shorter Distance to calculate
routes that are shorter in distance but can
take more time to drive.
Vehicle
—specify your vehicle type to
optimize routes.
Avoidances
—select (place a check mark
by) the road types you want to avoid on
your routes. The nüvi uses these road
types only if alternative routes take you
too far out of your way or if no other
roads are available. If you have a MSN
®
Direct Receiver connected, you can also
avoid trafc delays.
Attention Tone
—turn on or off the
attention tone.
Voice Prompts
—select when you want
the nüvi to announce route navigation
and system status.
Restore
—restore the original navigation
settings.