Filter
Top Products
42 nüvi 310/360 Owner’s Manual
customIzInG the nüvI
Changing the Navigation Settings
To change the navigation settings, on the Menu page, touch Settings > Navigation.
Route Preference—select a preference for calculating your route.
Vehicle—specify your vehicle type to optimize routes.
Avoidances—touch Enabled to access the road types. Select the road types you want
to avoid on your routes. The nüvi uses these road types only if alternative routes take
you too far out of your way or if no other roads are available. If you have an FM
trafc receiver, you can also avoid trafc incidents.
Attention Tone
—turn on or off the attention tone.
Voice Prompts—select when you want the nüvi to announce route navigation and
system status.
Changing the Bluetooth Settings
To change the Bluetooth settings, on the Menu page, touch Settings > Bluetooth.
Connections—select a device to connect to. Select Add Device to search the area for
mobile phones with Bluetooth
®
wireless technology. Set your mobile phone to Find
Me, Discoverable, or Visible, and then touch OK. The nüvi searches for all Bluetooth
wireless devices in the area and lists them. Select your phone, and then touch OK.
Enter the nüvi’s PIN in your phone.
NOTE: The nüvi’s PIN code (or passkey) is 1234.