Filter
Top Products
nüvi 310/360 Owner’s Manual 31
usInG an fm tmc traffIc receIver
UsinG fM Traffic
If you are using a trafc receiver, you can view trafc information on your nüvi.
When a trafc message is received, your nüvi displays the incident on the map, and
you can change your route to avoid the trafc incident. For trafc data coverage areas,
refer to the Garmin Web site at www.garmin.com/fmtrafc.
NOTE: The FM trafc receiver and nüvi must be in data range of an FM station
transmitting trafc data to receive trafc information.
NOTE: Garmin is not responsible for the accuracy of the trafc information. The
FM trafc receiver simply receives signals from the trafc service provider and
displays that information on your nüvi.
NOTE: You can only access the trafc information if the nüvi is connected to an
FM trafc receiver.
Connecting the FM Trafc Receiver
1. Place your nüvi into the mount, and plug it into the 12/24-Volt adapter.
2. Plug the mini-USB cable from the FM trafc receiver into the USB connector
on the side of the nüvi.
Connecting the FM Trafc Receiver