Garmin 300/350 GPS Receiver User Manual


 
Garmin © 2005–2006 68 nüvi Owner’s Manual
aPPendix
Troubleshooting
Problem/Question Solution/Answer
How do I know my nüvi
is in USB Mass Storage
Mode?
When your nüvi is in USB Mass Storage Mode, a picture of a nüvi
connected to a computer is shown. Also, you should see a new
removable disk drive listed in My Computer (Windows) or a new
volume (drive) on your desktop (Mac).
My computer never
senses that the nüvi is
connected.
1. Unplug the USB cable from your computer.
2. Turn the nüvi off and then back on again.
3. Plug the USB cable into your computer. The nüvi automatically
turns on and goes into USB Mass Storage Mode.
I cannot nd any drives
named “nuvi” in my list
of drives.
Try the solution listed above.
If you have several network drives mapped on your computer,
Windows may have trouble assigning drive letters to your nüvi drives.
Follow the steps on the following page to assign your drive letters.
Verify that your computer has the latest updates installed. If not,
update your computer, and then connect the nüvi.
I keep getting a message
saying “Unsafe Removal
of Device” when I unplug
the USB cable.
Windows users, double-click the Unplug or Eject icon in your
system tray. Select “USB Mass Storage Device” and click Stop. Select
the nüvi drives and click OK. You can unplug your nüvi from your
computer now.
Mac users, drag the volume icon to the Trash. The Trash icon
changes to an Eject icon.