Garmin 300/350 GPS Receiver User Manual


 
Garmin © 2005–2006 62 nüvi Owner’s Manual
aPPendix
   
Your nüvi accepts custom points of interest (POI) databases,
available from various companies on the Internet. Some custom
POI databases contain alert information for points such as safety
cameras and school zones. See the next page for information about
safety camera databases.
Your nüvi can notify you with a proximity alarm when you
approach one of these points. To adjust the way your nüvi noties
you of POIs, see page 51.
After downloading your POI database, use the Garmin POI Loader
to install the POIs into your unit. The POI Loader is available at
www.garmin.com/extras. Using the POI Loader program, you
can store the Custom POIs on your “nuvi” drive or your SD card.
You can also customize the proximity alert settings for each POI
using the POI Loader. Refer to the POI Loader Help le for more
information; press F1 to open the Help le.
To view your Custom POIs, touch Where To > My
Locations > Custom POIs. To delete the Custom POIs from
your nüvi, touch Where To > My Locations > Delete
All. Touch Yes to delete all of your Favorites and your Custom
POIs.
CAUTION: Garmin is
not responsible for the
consequences of using a
custom POI database or
the accuracy of the safety
camera or other custom
POI database.