Filter
Top Products
41
Getting Started
41
Reference
Symbol Field
Name Field
Editing Waypoints
Editing Waypoints
You can edit waypoints when they are created or after they have been saved
to memory. There are six items that can be changed, the symbol, name, location,
elevation, depth, you can choose whether or not to show the waypoint name
on the Map Page.
To edit a saved waypoint —
Press the MENU Key twice to display the Main
Menu. Highlight ‘Points’ and press ENTER, then highlight ‘Waypoints’ and
press ENTER again. Select the desired waypoint from the list (see page 39
for more information on the waypoint lists) and press ENTER to display the
Waypoint Page. When fi nished, highlight the ‘OK’ button and press ENTER
to accept the changes.
Selecting a symbol —
Place the highlight on the symbol fi eld and press
ENTER. Using the ROCKER, select a symbol from the list and press
ENTER. The selected symbol will be displayed at the waypoint location on
the Map Page.
Changing the Location, Elevation or Depth —
Place the highlight on the desired
fi eld and press ENTER. Using the ROCKER, scroll through the numeric
list until the desired number is displayed. Press the ROCKER to the right
to move to the next character. When fi nished, press ENTER to accept the
changes.
Show Name on Maps —
When ‘Show Name on Maps’ is checked, the waypoint
name will be displayed on the Map Page. To check/uncheck the box, place
the highlight over that box and press ENTER.
190-00229-00.indd 07/25/01, 11:22 AM41