Filter
Top Products
28
Getting Started
28
Reference
If you select ‘Off’, the items for that option will not be displayed on the Map
Page. If you select ‘Auto’, the GPS 76 will automatically determine the zoom
level at which to display the selected items. If you select a scale setting, the
items will be displayed on the map only when the Map Zoom Scale is at or
less than the selected scale .
As an example, if you select 500 ft as ‘Zoom’ Scale setting, the selected items
will only be displayed when the Map Zoom Scale is at 500 ft or less.
Setup Map — ‘General’ Tab
The ‘General’ Tab contains the settings for Detail, Orientation and Auto Zoom.
Below is a description of each feature. To change a setting, highlight the
appropriate fi eld then press ENTER. Make your selection, then press ENTER
to accept the new selection.
Detail —
Settings: Most, More, Normal, Less, and Least. The Detail settings
allow you to control the amount of map data displayed on the unit. If you
select a setting with high detail, the screen redraw times will be slower.
Orientation —
Settings: North Up, Track Up, and Course Up. This option
allows you to determine how the map is displayed. If ‘North Up’ is selected,
North will always be at the top of the display. If ‘Track Up’ is selected, your
current track will always be toward the top of the display. If ‘Course Up’ is
selected, the active course line will always be toward the top of the display. If
you have ‘Course Up’ selected and do not have an active course, your current
track will be toward the top of the display.
Auto Zoom —
This option allows you to have the map automatically zoom in
on a waypoint as you approach it.
Setup Map — ‘General’ Tab
Map Page Options
190-00229-00.indd 07/25/01, 11:22 AM28