Filter
Top Products
Introduction
2
Remote Usage
Alphanumeric Remote Control Usage
The StreetPilot 2610/2650’s alphanumeric remote control allows you to perform functions similar to the
unit’s touch screen and keypad controls. The key’s primary function appears on the key and the secondary
functions (same as keys on unit) for the PAGE, MENU, FIND, and SPEAK can be activated by holding the
key for more than 2 seconds (then release).
In order for the remote to operate properly, be sure to point the IR (infrared) window on the remote
towards the unobstructed IR window on the left front of the StreetPilot 2610/2650.
The remote also has additional function keys that allow you to quickly enter data and perform other
operations on the unit:
(ZOOM) IN Key — Zooms in to adjust the Map page scale to show a smaller area with more detail.
(ZOOM) OUT Key — Zooms out to adjust the Map page scale to show a larger area with less detail.
QUIT Key — Returns display to previous page. When entering data, pressing QUIT restores the previous
value (cancels data entry.)
ROUTE Key— Displays a pop-up window of available route navigation features.
THUMB STICK — Selects menu options, changes settings, and enters data. Also controls movement if the
panning cursor on the Map page. Press IN on the THUMB STICK to select/activate a highlighted item or
begin data entry.
ALPHANUMERIC KEYS — Used when entering alphanumeric data in the unit, such as an address or
waypoint name. These keys can be used in conjunction with the THUMB STICK. To select the fi rst letter
press the key once, to select the second letter press the key twice, to select the third letter press the key
three times, or to select the number press the key four times (fi ve times for 7 and 9). (The 1 key only
accepts one press and SPACE/0 key only accepts two key presses.) When you have the correct letter or
number selected, pause and the unit advances the cursor to the next character automatically.
The remote requires two AA alkaline batteries. To install the batteries, press UP on the battery door clip, then pull the
battery door away from the remote. Install batteries observing the correct polarity (see inside battery compartment).
Replace cover, making sure the it is closed all the way.
QUIT
PAGE
FIND
MENU
IN
OUT
ROUTE SPEAK
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
0
ZOOM
IR Window
2610_2650 OM.indd 2 8/1/2003, 4:15:38 PM