Filter
Top Products
Garmin G3X MFD Quick Reference Guide
190-01055-00 Rev. A
12
GPS Navigation
OverviewGPS NavigationFlight PlanningHazard AvoidanceAdditional FeaturesAppendicesIndex
2)
Turn or move the FMS Joystick to highlight ‘Set Bug Indicator’, and press
the ENT Key. The ‘Set Bug Indicator’ Menu appears.
3)
Turn or move the FMS Joystick to highlight the desired menu option, and
press the ENT Key. For the ‘User Selected’ option, turn the FMS Joystick to
select the desired heading reference, and press the ENT Key.
Manually setting a course to the destination waypoint:
1)
From the Map Page with the Panel or Compass Arc displayed, press the
MENU Key to display the Map Page Menu
2)
Turn or move the FMS Joystick to highlight ‘Set OBS and Hold’, and press
the ENT Key.
3)
Turn the FMS Joystick to select the desired course to the destination, and
press the ENT Key.
Returning to automatic sequencing of route waypoints:
1)
From the Map Page after manually setting a course, press the MENU Key to
display the Map Page Menu
2)
Turn or move the FMS Joystick to highlight ‘Release Hold’, and press the
ENT Key.
2.2 VERTICAL NAVIGATION (VNAV)
Configuring a VNAV profile:
1)
While navigating a flight plan or direct-to, press the FPL Key.
2)
Turn the FMS Joystick to select the Vertical Navigation Page.
3)
Press the FMS Joystick to activate the cursor.
4)
Enter the desired profile into the fields, and press the EXIT Softkey.
Enabling/disabling the VNAV indicator:
1)
From the Map Page, press the MENU Key to display the Map Page Menu
2)
Turn or move the FMS Joystick to highlight ‘Enable VNAV Indicator’ or
‘Disable VNAV Indicator’, and press the ENT Key (must be navigating a
Flight Plan or Direct-to and have the Panel displayed).
Capturing/cancelling VNAV profile:
1)
Enter a valid VNAV profile and begin navigation.
2)
From the Map Page, press the MENU Key to display the Map Page Menu