Filter
Top Products
Colorado
™
Series Owner’s Manual 3
GettInG Started
Using the Rock ‘n Roller
™
When searching for and selecting different functions on
the Colorado, use the Rock ‘n Roller.
The Rock ‘n Roller rotates clockwise and
counter-clockwise, and can be used to move
through the lists on any of the Colorado screens
and to zoom in or out on the map.
ENTER key
Highlight options and pan the map by pressing
up, down, left, or right.
To select a highlighted item, press the ENTER
key in the center of the Rock ‘n Roller.
•
•
•
Operating the Colorado
Power key—press and hold the Power key to turn
the Colorado on or off. Press quickly and release to
access the System Status page.
Select—highlight an area on the screen with the
Rock ‘n Roller and press ENTER to make a selection.
Soft keys—the Left soft key and the Right soft key are
used to access specic functions that appear on the soft
key labels.
Restore Defaults—factory settings that are saved in
the memory of the Colorado. If you customize the
settings on the Colorado, you can revert to the factory
settings by choosing Restore Defaults.
Soft key label
Right soft key