Filter
Top Products
13
14
Change Heading with U-Turn
If you program the [Right Chevron] and [Left Chevron] buttons for U-Turns, pressing the [Right Chevron]
button will cause the boat to make a U Turn to the starboard, and the [Left
Chevron] button will cause the boat to make a U Turn to port. You can exit
the U-Turn and return to heading hold anytime by pressing either the [Right
Arrow] or [Left Arrow] button.
To Program a U-Turn:
You must be in [Auto] or [STBY] mode before selection process can start
1. Press and hold [Setup] button.
2. While holding down the [Setup] button, select and light up [number 6 LED] [U-Turn] on the handheld.
(press and release button until the 6 LED is lit.)
3. Release the [Setup] button.
4. When you are ready to initiate a U-turn press the right or left Chevron buttons, depending on the direction
you want to make the U-turn. Example: To make a U-turn to starboard, press and release the [Right Chevron
button]. If you want this button to be a startup default, you will need to download the settings into permanent
memory, otherwise it will go back to factory defaults when the system is turned off and restarted.
5. To
save the changes into permanent memory and
make the selected function into a startup
default: Press and release the [Setup] button (the [Setup] LED should be lit), and then
press and hold the [Select Load] button. While holding down the [Select Load] button,
press and release the [Deckmount] On/Off button quickly, then release the GPS [Select
Load] button.
Press the Left
Chevron Button
to U-Turn to Port
Press the Righ
t
Chevron Button
to U-Turn to
Starboar
d