Filter
Top Products
zūmo 200 Series Owner’s Manual
Getting Started
8. Tilt the zūmo back until it snaps into
place.
9. Plug the other end of the vehicle
power cable into a power outlet in
your vehicle. Your zūmo should turn
on automatically if it is plugged in and
the vehicle is running.
Mounting Your zūmo on
the Motorcycle
‹
WARNING
Incorrectly wiring the power cable with
bare wire leads can result in damage
to the vehicle or the battery and can
cause bodily injury. Garmin strongly
recommends having an experienced
installer with the proper knowledge of
electrical systems install the unit.
Notice
To avoid draining the motorcycle battery,
disconnect the power cable from your
zūmo device when you are not riding.
NOTE: Select a suitable and secure
location to mount the zūmo on your
motorcycle, based on available power
sources and safe cable routing.