Garmin 12 GPS Receiver User Manual


 
Zooming, Panning, and Map Options (cont.)
From the waypoint definition page, you can also
define how each individual waypoint is displayed on
the map. The GPS 12 displays waypoints as a name
with a corresponding symbol (e.g., “fuel” and a gas
pump symbol), a symbol only (e.g., a fish symbol), or a
16-character comment and corresponding symbol (e.g.,
“great view” and the camp site symbol). The waypoint
name has a six character limit while the “comment”
field has a 16-character limit, and there are 16 different
waypoint symbols available.
To select a waypoint display option:
1. Display the waypoint definition page for the desired
waypoint (by selecting a waypoint from the Map Page
or from a waypoint list).
2. Highlight the “symbol” field (to the right of the name
field), and press
E
display the Symbol Options.
3. Move the cursor to the ‘DISPLAY’ field, and press
E
.
4. Select a display option, and press
E
to select one
of the following display options: ‘NAME WITH SYM-
BOL,’ ‘SYMBOL ONLY,’ or ‘COMMENT WITH SYMBOL.’
5. Press
E
to confirm the ‘DONE?’ prompt.
6. Press
E
again (on the waypoint definition page)
to return to the Map Page.
The last function you can perform with a waypoint
highlighted on the Map Page is a GOTO directly to the
waypoint.
To go to a waypoint highlighted on the Map Page:
1. Press
G
while the waypoint is highlight by the
crosshair.
2. Press
E
to confirm the GOTOwaypoint page.
Using the Cursor to Mark and Go to Waypoints
During panning, the crosshair represents a target
position right on the Map Page, with the range and
bearing to the target displayed at the top corners of the
screen. You can also use the target crosshair to mark a
new waypoint position or as a GOTO destination right
from the map field.
To mark the target crosshair as a new waypoint:
1. Pan to the desired position on the map and press
M
.
2. Enter a name and/or route number, and press
E
.
37
You can custom tailor the
Map Page to display way-
points by any of thre e
options: Symbol Only,
Name With Symbol or
Comment With Symbol.
REFERENCE
Waypoint
Display &
Marking Cursor
Marking a Cursor
Position
To mark a new waypoint
with the crosshair, simply
pan to the desired position
and press the MARK key.
GPS12B 1/13/99 4:28 PM Page 37