Filter
Top Products
8-4
8.8 Alarm Information
When an alarm setting has been violated the
buzzer sounds and the speaker icon (shown
in red) appears. You can see which alarm
has been violated, as well as silence the
buzzer, on the alarm menu display.
1. Press the [ALARM] key.
DGPS 3D
ALARM1
EDIT
CLEAR
ALARM
ALARM INFORMATION
AUDIO ALARM
ARRIVAL ALARM
ANCHOR ALARM
PROXMTY ALARM
XTE ALARM
SPEED ALARM
ON
ON 0.100nm
ON 0.050nm
ON
ON 0.100nm
OVER/UNDER
12.5 ~ 15.0kt
YOU’VE ARRIVED AT
WAYPOINT : SP-001.
Alarm information
(Example: Arrival alarm)
s
NEXT
PAGE
Figure 8-11 Alarm menu
2. Press the soft key CLEAR ALARM to si-
lence the buzzer. The color of alarm mes-
sage and the speaker icon may change
from red to black.
Note: The speaker icon is displayed in red
until all alarms have been acknowledged on
the alarm menu display. If more than one
alarm has been violated the message CON-
TINUE appears at the bottom of the display.
In this case press the soft key NEXT INFO to
see which other alarms have been violated.
Alarm messages
T
able 8-1 Alarm messages and their meanings
egasseMgninaeM
TADEVIRRAEV'UOY
.TNIOPYAW
gnittesmralalavirrA
.detaloiv
DEDEECXEEVAHUOY
HCTAWROHCNA
.TIMIL
mralahctawrohcnA
.detaloivgnittes
NADERETNEEV'UOY
.AERAECNADIOVA
mralaytimixorP
.detaloivgnittes
DEDEECXEEVAHUOY
.TIMILETX
gnittesmralaETX
.detaloiv
DEDEECXEEVAHUOY
.TIMILMRALADEEPS
gnittesmraladeepS
.detaloiv