Filter
Top Products
5-5
5.4 Waypoint Mark Size
You may change the size of all waypoint
marks to small or large (default), or turn them
off.
1. Press the [MENU] key to open the main
menu.
2. Press the soft key CHART SETUP OP-
TIONS.
3. Press the soft key CHART DETAILS to
open the CHART DETAILS menu.
DGPS 3D
CHART
DETAIL
RETURN
EDIT
DEPTH
INFO
LAT/LON GRID
TEXT INFO
WAYPOINT
WAYPOINT NAME
INDEX
LANDMASS
BACKGROUND
NAV AIDS
SECTOR INFO
OTHER SYMBOLS
MARK SIZE
GREEN
ON
LARGE
ON
ON
BRT YELLOW
BLUE
ON
OFF
WHITE
STD
s
Figure 5-11 Chart details menu
4. Press ▲ or ▼ to select WAYPOINT.
5. Press the soft key EDIT.
6. Press ▲ or ▼ to select LARGE, SMALL
or OFF. LARGE shows mark in actual
shape. SMALL displays all waypoints with
an “X” regardless of mark shape selected.
7. Press the soft key ENTER or [ENTER]
key.
5.5 Changing Waypoint
Position on the Plotter
Display
You may change the latitude and longitude
position of waypoints on the plotter display
as follows:
1. Press the [WPT/RTE] key followed by the
soft key WAYPOINTS to open the
waypoint menu.
2. Press the soft key WAYPOINT BY CUR-
SOR. The plotter display appears.
3. Operate the cursor pad to place the cur-
sor on the waypoint which you want to
change. A flashing diamond mark appears
on the waypoint when it is correctly se-
lected.
4. Press the soft key EDIT/MOVE.
5. Press the soft key MOVE WPT.
6. Operate the cursor pad to place the cur-
sor on the location desired.
7. Press the [ENTER] key.
The waypoint moves to the cursor position
and its new position is recorded on the
waypoint list. If the waypoint is set as desti-
nation or is part of a route, you are asked if
you are sure to move the waypoint. In this
case, press the [ENTER] key again, or the
[CLEAR] key to cancel move.
5.6 Searching Waypoints
You can search for a waypoint through the
alpha/numeric list as follows:
1. Press the [WPT/RTE] key, and then press
the soft keys WAYPOINTS and ALPHA/
NUMERIC LIST to show the alpha/nu-
meric list. At the bottom of the display the
search window appears.
SEARCH FOR _ _ _
Figure 5-12 Search window
2. Use the alphanumeric keys to enter the
first 1 - 3 characters in the search win-
dow. The waypoint searched appears at
the top of the screen.