Filter
Top Products
4. MAINTENANCE & TROUBLESHOOTING
4-2
4.2 Replacing Fuses
The transceiver unit, monitor unit and control unit are equipped with a fuse which protects
them from overvoltage and equipment fault. If a fuse blows, find the cause before replacing
it. If it blows again after replacement, contact your dealer for advice. All fuses are located
inside the units. Therefore, have a suitably qualified technician replace the fuses.
WARNING
Use the proper fuse.
Use of a wrong fuse can result in damage
to the equipment or cause fire.
Unit Type Code No.
Monitor Unit FGMB 3A 125V 000-104-909
Control Unit FGMB 2A 125V 000-103-165
FGBO 3A AC250V 000-549-021
Transceiver Unit
(100 VAC spec.)
FGBO 5A AC250V 000-549-022
Transceiver Unit
(200 VAC spec.)
FGBO 3A AC250V 000-549-021