Filter
Top Products
3. CUSTOMIZING THE SYSTEM
3-3
3.2 Function Keys
3.2.1 Programming the function keys
The function keys ([F1]-[F3]) provide menu shortcut operation. You may program the keys
as follows:
1. Press the [MENU] key to display the main menu.
2. Choose menu desired.
Note: The ALARM and INSTALLATION menus cannot be used.
3. Choose menu item desired.
Note: RESET TRIP LOG, TEST and BOTTOM SEARCH in the MENU 1 cannot be
used.
4. Press and hold down a function key until you hear three beeps and the message
“PROGRAMMED SELECTED ITEM TO [F*] KEY” is displayed (about five seconds). (*
Function key number pressed.)
5. Press the [MENU] key to close the menu.
3.2.2 Using the function keys
The function keys provide shortcut menu operation, and they are not programmed at the
factory. If a function key contains no program when pressed, the message “NO FUNCTION
ASSIGNED TO [F*] KEY.” appears on the display for about five seconds. (* function key
pressed.)
1. Press any function key. An appropriate setting window appears on the display.
2. Within five seconds after completing step 1, operate the CursorPad to change setting as
below.
Change numeric data: ► or ▲ to raise the setting; ◄ or ▼ to lower it.
Choose option: ► or ▲ to scroll rightward; ◄ or ▼ to scroll leftward.