Filter
Top Products
ii
CAUTION
Check the zinc plate (anticorrosion
measure) regularly for corrosion and
replace it when the ship is drydocked.
Corrosion may occur. As a result the
transducer may fall out, allowing water to
leak inside the vessel.
Do not use the equipment for other than
its intended purpose.
Damage to the equipment or bodily
injury may result if the equipment is
misused.
Do not transmit with the transducer out
of water, when drydocked, etc.
The transducer may become damaged.
Turn off the power at the switchboard
immediately whenever you feel the
equipment is abnormal.
Turn off the equipment at the switchboard
if it becomes warm or is making strange
noises. Contact your dealer at your earliest
convenience.
A warning label is attached to the
transceiver and monitor units. Do not
remove the labels. If a label is missing
or damaged, contact a FURUNO agent or
dealer about replacement.
WARNING
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
Transceiver Unit
Name: Warning Label (1)
Type: 86-003-1011-1
Code No.: 100-236-231
Monitor Unit
Name: Warning Label (2)
Type: 03-129-1001-1
Code No.: 100-236-741
WARNING LABEL
TFT LCD
The high quality TFT LCD displays 99.99%
of its pixels. The remaining 0.01% of pixels
may light or dropout, however this is not
an indication of malfuction; it is a
characteristic of the LCD.