Filter
Top Products
Safety Restraints
39
[SR18501(ALL)09/95]
Follow the child seat manufacturer’s instructions to attach the
tether strap to the tether bracket.
*
[SR18950(ALL)06/95]
RWARNING
Only use the tether attachment hole locations shown in
the illustrations. The tether anchor may not perform
properly if the wrong mounting location is used.
*
[SR19595(R )05/95]
In Super Cabs equipped with Center Facing Jump Seats, the
tether strap anchor bracket should be installed only at the center
of the cab’s back panel with the child seat in the front center
seating position. Installing an anchor bracket at the right rear of
the cab may increase risk of injury to an occupant of the right
rear center facing jump seat in the event of a collision or
sudden stop. If a tethered child seat is installed in the right
front seating position, secure the tether strap to the webbing of
the buckled right rear lap belt.
*
[SR19600(R )05/95]
RWARNING
Do not install a child seat in a center facing jump seat.
%
*
[SR19700(ALL)07/95]
Safety Belts for Children
*
[SR19800(ALL)07/95]
Children who are too large for child safety seats should always
wear safety belts. (See instructions with your child seat, or
contact its manufacturer, to determine maximum size of child
that will safely fit in the seat.)
*
[SR19900(ALL)07/95]
RWARNING
If safety belts are not properly worn and adjusted as
described, the risk of serious injury to the child in a
collision will be much greater.
File:03unsrr.ex
Update:Wed May 1 13:43:56 1996