Filter
Top Products
Safety Restraints
21
[SR03800(ALL)06/95]
10-1/2 pica
art:0021301-A
Unfastening the outboard lap/shoulder belts
[SR05800(ALL)08/94]
Center Front Lap Belt (If equipped)
[SR05900(ALL)10/90]
The lap belt in the center of the front seat does not adjust
automatically. You must adjust it to fit snugly around your
hips. Do not wear it around your waist.
*
[SR05950(ALL)06/95]
To fasten the belt, pull the belt across your hips and insert the
tongue into the correct buckle on your seat until you hear a
snap and feel it lock. Make sure the buckle is securely fastened.
%
*
[SR06100(ALL)06/95]
If you need to lengthen the belt, unfasten it and tip the belt
tongue at a right angle to the belt. Pull the belt tongue over
your lap until it reaches the buckle.
*
[SR06400(ALL)06/95]
If you need to shorten the belt, pull on the loose end of the
webbing until the belt fits snugly.
[SR06500(ALL)10/90]
To unfasten the belt, push the release button on the buckle. This
allows the tongue to unlatch from the buckle.
[SR06600(ALL)06/95]
Because the center front lap belt does not have a retractor, it
should be shortened and fastened when not in use.
File:03unsrr.ex
Update:Wed May 1 13:43:56 1996