Filter
Top Products
222
[RE02300(ALL)08/94]
10-1/2 pica
art:0021186-B
Attaching jumper cables
*
[RE02500(ALL)03/95]
Jump-Starting
*
[RE02600(ALL)03/95] 1. Make sure that the jumper cables are not in the way of
moving engine parts, then start the booster vehicle. Run the
engine at a moderate speed.
*
[RE02700(ALL)03/95] 2. Let the discharged battery charge for a few minutes and then
start the disabled vehicle. It may take a couple of tries before
the vehicle starts. If the vehicle does not start after several
attempts, there may be a different problem.
*
[RE02800(ALL)03/95] 3. When both vehicles are running, let them idle for a few
minutes to charge the discharged battery.
%
*
[RE02900(ALL)03/95]
Removing jumper cables
*
[RE03000(ALL)03/95] 1. Always remove the jumper cables in the reverse order.
Remove the negative (Ҁ) end of the jumper cable from the
metallic surface on the engine or frame of the disabled
vehicle.
*
[RE03100(ALL)06/95] 2. Remove the negative (Ҁ) cable from the booster battery.
*
[RE03200(ALL)06/95] 3. Remove the positive (+) cable from the booster battery.
File:12unrer.ex
Update:Wed May 1 13:53:18 1996