Filter
Top Products
130
%
*
[AS29260(ALL)10/95]
How to tune radio stations
[AS29265(ALL)10/94]
There are four ways for you to tune in a particular station. You
can use the “TUNE”, “SEEK”, “SCAN” or the memory buttons.
*
[AS29270(ALL)09/95]
■ Using the “TUNE” function
[AS29275(ALL)03/95]
You can change the frequency up or down one increment at
a time by pressing and releasing either the left (
b
) or right
(
a
) side of the “TUNE” button. To change frequencies
quickly, press and hold down either the right or left side of
the button.
*
[AS29280(ALL)10/95]
Manual tuning adjusts your radio to any allowable broadcast
frequency, whether or not a station is present on that
frequency. (See All About Radio Frequencies in this section.)
*
[AS29285(ALL)10/95]
■ Using the “SEEK” function
[AS29290(ALL)09/94]
This feature on your radio allows you to automatically select
listenable stations up or down the frequency band. Press the
right (
a
) side of the “SEEK” button to select the next
listenable station up the frequency band. Press the left (
b
)
side of the button to select the next listenable station down
the frequency band. By pressing and holding the button,
listenable stations can be passed over to reach the desired
station.
*
[AS29295(ALL)01/95]
■ Using the “SCAN” function
*
[AS29305(ALL)04/95]
Pressing the “SCAN” button will begin the scan mode up
the frequency band, stopping on each listenable station for
approximately five seconds.
*
[AS29310(ALL)02/95]
To stop the scan mode on the presently sampled station,
press the “SCAN” button again.
File:09unasr.ex
Update:Wed May 1 13:49:43 1996