Filter
Top Products
P/N: 4FM020-010
© 2003 Vortech Engineering, LLC
All Rights Reserved. Intl. Copr. Secured
20OCT03
v3.1 4.6/5.4Exped/Nav(4FM v3.1)
11
H. Install the supplied support strap between the back of
the main mounting bracket and the boss on top of the
thermostat housing. Secure both ends using the sup-
plied 6mm bolt and washer and the 1/4-20 x 1" flat
allen bolt, washer and lock nut.
I. Attach the supplied power steering reservoir bracket
to the main mounting bracket using the 1/4-20 bolt
and washers (see photo).
J. Trim 4" off of the top end of the stock 5/8" supply hose
connecting the reservoir to the pump and reattach.
K. Extend the stock power steering return hose using
the supplied 3/8" line and hose mender. Secure with
the two supplied #4 hose clamps.
L. Mount the power steering reservoir onto the new
power steering reservoir bracket and attach with the
provided 1/4" hardware. Using tie wraps, secure the
power steering lines away from the steering shaft.
8B. MAIN MOUNTING BRACKET ASSEMBLY AND MOUNTING (5.4L models only), cont'd.
Fig. 8B-c
Fig. 8B-d