Filter
Top Products
11
• Fit a
5
/
16
" (small diameter) washer, round bushing (ring
side first), pivot wheel and a second round bushing
(barrel side first) onto the short leg of the pivot axle.
• Fit a .354 (small diameter) cap nut on the end of the
pivot axle's short leg.
• Tap the cap nut with a hammer to secure it on the end
of the pivot axle.
11
• Fit a
7
/16" (large diameter) washer onto the end of the
long axle.
• Fit a driver (ring side out) onto the end of the axle.
The driver may need to be rotated so that it fits
onto the teeth on the gearbox.
• Fit a large wheel (inside surface first) and hex bushing
(barrel side first) onto the end of the axle. Make sure
that the ribs on the wheel fit into the grooves on
the driver.
• Fit a .437 (large diameter) cap nut onto the axle end.
• Support the opposite end of the axle and tap the cap
nut with a hammer to secure it on the end of the axle.
Hex
Bushing
Long
Axle
Driver
Wheel
.437
Cap
Nut
Assembly
Wheel
Driver
7
/16" Washer
7
/16" Washer
Long
Axle
Gearbox
Temporary
Retainer
Strap
Temporary
Retainer
Strap
Gearbox
Gearbox
Long
Axle
Driver
Gearbox
8
9
• While carefully holding a gearbox in place, cut and
remove the temporary retainer strap from the gearbox
using safety scissors (see inset). Properly dispose of
the retainer strap.
• While holding the gearbox in place, slide the end of
the long axle through the gearbox and into the vehicle
body until the end of the axle is at the center of the
vehicle body.
• While carefully holding the other gearbox in place, cut
and remove the temporary retainer strap from the
gearbox using safety scissors. Properly dispose of the
retainer strap.
• While holding the gearbox in place, continue to slide
the long axle through the vehicle body and out through
the gearbox. The driver may need to be rotated
so that it fits onto the teeth on the gearbox.
Ring
Side
Pivot
Wheel
5
/
16
" Washer
.354
Cap
Nut
Round
Bushing
Round
Bushing
Pivot Axle
Short
Leg
Round Bushing
Bottom View
Bottom View
Bottom View
CUT
HERE
CUT
HERE
CUT
HERE
Temporary Retainer Strap
10