Fiat 1116 CC Automobile User Manual


 
the ring nut which secures the handle to the
glass.
33 When refitting the screws or ring nut to
the glass, make sure that the insulating
washers are in good condition to prevent
metal-to-glass contact.
Door trim panel
(Turbo ie model) -
removal and refitting ¡
34 The operations are similar to those
described in Chapter 12, Section 11, except
that electric windows are fitted instead of a
conventional mechanical regulator and
handle. Before the trim panel can be
withdrawn, the window control switches
must be disconnected from the wiring plug,
and the plug fed through the panel aperture
(photos).
13•114 Supplement: Revisions and information on later models
17.34C Door interior showing electric
window motor (arrowed)
17.34B Disconnecting an electric window
regulator switch plug
17.34A Armrest electric window switches