Filter
Top Products
The electric air pump is a
high-volume, low-pressure
pump, as shown in Figure
47. This is intended to
inflate or deflate items, such
as your Motorized Pool
Lounger and air mattresses.
To use your electric air
pump, please follow these
instructions.
To Inflate
Turn the ON/OFF switch to
OFF.
Plug the electrical cord
into a wall socket.
Insert the correct adapter
size onto the nozzle of the
electric air pump. If you are
using it for the Motorized
Pool Lounger, you will need
to use the medium size
adapter.
Insert the tip of the adapter
into the valve of the inflat-
Figure 47
able item and switch ON to
begin inflation.
While inflating, be sure
not to obstruct the valve.
This may cause the pump to
overheat.
When inflating large
items, such as a king-size air
mattress, the pump should fit
directly into the valve of the
inflatable item for fast infla-
tion. Use the appropriate
adapter for smaller valves.
How to Use the Electric
Air Pump
To Deflate
To deflate an inflatable
item, open the valves of the
inflated item. You can either
allow it to deflate on its own.
If you want to expedite the
deflation process, follow
these instructions.
Turn the
ON/OFF switch to
OFF. Plug the electrical cord
into a wall socket.
Insert the deflation port
(located on the top of the
electric air pump) into the
valve of the inflatable item
and switch
ON to begin de-
flation.
20 21
Special Care & Handling for the Electric Air Pump
• Avoid rough handling, such as bumping or dropping.
• Avoid moisture and extreme temperatures. For best
results, use between the temperatures of 39˚ F and 100˚ F
(4˚ C and 38˚ C).
• Clean using only a slightly damp cloth. Do not use
cleaners with chemical agents.
Figure 48 Figure 49