Filter
Top Products
Page 6
Installation
Power and Audio Connection
To power the Road Tech 75, simply slide the detector onto the installed mount.
Power and audio connections are made through the integrated mount.
NOTE
Road Tech 75 operates on 12 volts DC negative ground only.
Mounting
Obtain the appropriate Road Tech Radar Detector mounting kit for your model
motorcycle from a local Harley-Davidson dealer. Install the mounting kit per
the instructions included in the kit.
1. Once the mounting kit has been installed on the motorcycle, position the
detector to the mounting bracket with the controls facing up.
2. Slide the detector into the bracket until tab on detector fully engages
with two sharp clicks.
NOTE
If the detector does not fasten with two definite clicks, it could slide off the
bracket and fall to the pavement while the motorcycle is in motion.