Filter
Top Products
Page 13
Customize Road Tech with EZ Programming
Example of Programming
Here is how you would turn the Road Tech 75’s AutoMute feature off.
1. Enter the Program mode by holding the
CITY
and
DIM
buttons down for
2 seconds. The Road Tech 75 will beep twice and display “Program”.
2. Then hold the
REVIEW
button down. The Road Tech 75 will scroll
through the categories, starting with Pilot Light (“Pilot”), then Power-up
(“Pwr Auto”), then Power-On Sequence (“PwrOn”), then Signal Strength
Meter (“Meter”), and then AutoMute (“aMute”).
3. Release the
REVIEW
button when the Road Tech 75 shows the Auto-
Mute item. Since the factory setting is for AutoMute to be on, the Road
Tech 75 will display “aMute ON”. (If you accidentally don’t release the
Review
button in time, and the Road Tech 75 goes to the next category,
simply continue to hold the
Review
button down until it scrolls through
all categories. It will begin again at the top of the list.)
4. Press the
CHANGE
button to change from aMute ON to aMute OFF.
5. To complete the Programming, simply wait 8 seconds without pressing
any button. The Road Tech 75 will display “Complete”, beep 4 times, and
return to normal operation.