Filter
Top Products
Page 27
Troubleshooting
Problem Solution
Road Tech 75 beeps briefly at the
same location every day, but no radar
source is in sight.
An X-band motion sensor or intrusion
alarm is located within range of your
route. With time, you will learn predict-
able patterns of these signals.
Road Tech 75 does not seem sensi-
tive to radar
Road Tech 75 may be in City mode.
Road Tech 75 did not alert when a
police car was in view.
VASCAR, (Visual Average Speed
Computer and Recorder) a stopwatch
method of speed detection, may be in
use or the officer may not have radar
or laser unit turned on.
Road Tech 75 did not provide a Safety
signal while within range of an emer-
gency vehicle.
Safety transmitters may not be com-
monly used in your area.
Road Tech 75’s display is not working. Press the
DIM
button to deactivate
Dark mode.
Road Tech 75’s audible alerts are less
loud after the first few alerts.
Road Tech 75 is in AutoMute mode.
See page 17.
Road Tech 75’s power-on sequence
reoccurs while you are riding.
Road Tech 75 may not be fully
engaged to the mount. Check connec-
tion or contact your dealer.
Your 14-year old son has changed all
8 of the EZ programming options.
You can return all of the programming
options to the factory defaults by hold-
ing down the
CITY
and
DIM
buttons
while you turn Road Tech 75 on.