Filter
Top Products
Page 17
Customize Road Tech with EZ Programming
Power-On Sequence:
PwrOnSTD (standard)
In this setting, each time the Road Tech 75 comes on, it will display “Road
Tech”, “75”, “LASER”, “Ka-band”, “K-band”, “X-band”, followed by a brief X-
band alert. (factory default)
PwrOnFST (fast power-on)
In this setting, each time you turn on Road Tech 75, it will display a brief X-
band alert.
Signal Strength Meter:
MeterSTD (standard meter)
In this setting, the meter displays the band of the received signal, and a bar
graph showing the relative signal strength. (factory default)
MeterEXP (Expert Meter)
In this setting, the meter simultaneously tracks multiple radar signals. It shows
up to 2 Ka band, 2 K band, and 4 X band signals.
NOTE
The ExpertMeter feature is explained in more detail on page 10.
AutoMute:
aMute ON (automute on)
In this setting, the Road Tech 75’s audio alerts will initially be at the volume
you’ve set, but after a few seconds, the audio will automatically reduce the
volume level, to keep you informed, but at a lower volume. (factory default)
aMuteOFF (automute off)
With AutoMute off, Road Tech 75’s audio alerts will remain at the volume you
set for the duration of the radar encounter.
Details of EZ Programming Options