Filter
Top Products
Page 10
Controls and Features
Signal Strength Meter:
The Road Tech 75’s matrix display consists of 280
individual LED’s, to provide an intuitive ultra-bright display of signal strength
and text messages. When the Road Tech 75 detects radar, it displays the band
of the radar (X, K, or Ka), and a precise bar graph of signal strength. When
Road Tech detects laser or POP, the display will show “LASER” or “POP”.
NOTE
If you are operating the Road Tech 75 in the Dark mode, the display will not
light when a signal is detected- only the audio will alert you.
ExpertMeter:
The Road Tech 75’s ExpertMeter option is an advanced display
for experienced detector users. Please use the detector for a few weeks to get
familiar with its other features before using ExpertMeter.
To use the ExpertMeter instead of the bar graph signal strength meter, you
must select ExpertMeter in the EZ Programming section.
See page 12.
The Road Tech 75’s standard signal strength meter only displays information
about a single radar signal. If there are multiple signals present, the Road
Tech 75’s internal computer determines which one is the most important
threat to show on the bar graph meter. However, the Road Tech 75’s Expert-
Meter simultaneously tracks up to 8 radar signals. It shows you detailed infor-
mation on up to 2 Ka-band, 2 K-band, and 4 X-band signals.
ExpertMeter can help you spot a change in your normal riding environment;
for example, a traffic radar unit being operated in an area where there are nor-
mally other signals present. The ExpertMeter is actually a miniature spectrum
analyzer. It shows what band each signal is, its relative frequency within the
band, and its signal strength.
Above is the ExpertMeter display if the Road Tech 75 was detecting 2 strong
Ka-band, 2 strong K-band, and 4 strong X-band signals.
KA K X