Filter
Top Products
Page 16
Customize Road Tech with EZ Programming
Details of EZ Programming Options
Pilot Light (power-on indication):
NOTE
When you are using the Dark mode, the display will only show “HD”, “AD”, or
“CD,” (Highway-Dark, Auto-Dark, or City-Dark).
Pilot HWY (full description)
In this setting, Road Tech 75 will display “Highway,” “City,” or “Auto” as its
power-on indication. (factory default)
Pilot H (letter)
In this setting, Road Tech 75 will display “H” for Highway, “C” for City, and “A”
for Auto.
Pilot H.> (Letter with scanning dot)
In this setting, Road Tech 75 will display “H” for Highway, “C” for City, and “A”
for Auto. Also, a single dot will continuously scroll across the display.
Pilot V (motorcycle voltage)
In this setting, Road Tech 75 will continually display “H” for Highway, “C” for
City, and “A” for Auto, and the motorcycle voltage. If the motorcycle voltage
drops below 9.0 volts, a low voltage warning is displayed, followed by an audi-
ble alert. A high voltage warning is also given if the voltage goes above
15.0 volts.
Power-Up:
PwrAuto (standard)
In this setting, Road Tech 75 will turn on or off automatically with the bike’s
ignition.
PwrMan (manually)
In this setting, Road Tech 75 will need to be turned on with the top-mounted
Power/Mute
button.