Filter
Top Products
Data sheet
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.El-O-Matic.com or from your nearest Valve Automation Center USA: +1 813 319 0266 Europe: +31 74 256 10 10 Asia-Pacific: +65 6501 4600
www.El-O-matic.com
Sheet No.:
Date: November 2010
A1.102.10 Rev. C
EL-O-MATIC BASIC PNEUMATIC ACTUATOR CONFIGURATION E/P
Single or Double action
ES
or
PS
= Single acting,
ED or PD
= Double acting
Actuator siz
e
E-series
0012 = E12 0025 = E25 0040 = E40 0065 = E65 0100 = E100 0150 = E150
0200 = E200 0350 = E 350 0600 = E600 0950 = E950 1600 = E1600
P-series
2500 = P2500 4000 = P4000
Valve flange
Metric Metric UNC/NPT
Finish
ISO 5211 DIN 3337 ISO 5211
M = D =
U =
Standard
N = E = V =
CSR coating
(2
+ Aluminum pinion
O =
F =
W =
CSR coating
(2
+ Stainless Steel pinion
(3
Limit stops
0 = No limit stops 1 = L1 One way limit stops 2 = Double Stroke Adjustment
Standard on P-series Standard on E-Series Standard on DSA-Series
Assemb
ly code
Code Action Rotation Mounting
A =
Spr
ing to close clock wise in line with pipeline
B =
Spring to close clock wise across pipeline
C =
Spr
ing to open counter clock wise across pipeline
D =
Spring to open counter clock wise in line with pipeline
Spring set E-serie Spring set P-serie
00 = Double acting actuator 00 = Double acting actuator
01 = Springset 1 04 = Springset 4 04 = Springset 4 10 = Springset 10
02 = Springset 2 05 = Springset 5 06 = Springset 6 12 = Springset 12
03 = Springset 3 06 = Springset 6 08 = Springset 8 14 = Springset 14
Future expansion
A = Standard
Default Insert
Size (in mm.)
(1
E12 E25 E40 E65 E100 E150 E200 E 350 E600 E950 E1600 P2500 P4000
- ISO or UNC 00 11 14 14 19 19 22 27 27 36 46 00 00
- DIN 00 11 14 14 17 17 22 22 27 36 46 00 00
Visual Indication Code
D = Disk K = Knob N = No visual indication
Temperature range
0 = Standard TS: 80°C (176°F) -20°C ( -4°F)
1 = High temp TS: 120°C (248°F) -20°C ( -4°F)
2 = Low temp TS: 80°C (176°F) -40°C (-40°F)
ES 0040.M 1 A 05 A.14 N 1
(1
Actuators E12, P2500 and P4000 have no inserts. They have have a inner square the shaft
180° actuators are not covered by this configuration matrix.
(2
CSR Coating not possible in combination with Double Stroke Adjustment limit stops (DSA series).
(3
Stainless Steel Pinion not possible in combination with Double Stroke Adjustment limit stops (DSA series).
See following data sheets
for more information
A1.104.01 / A1.104.02
A1.103.106 / A1.103.073 /
A1.103.102 / A1.103.103
A1.101.30 / A1.101.33 /
A4.204.01
A1.501.01/
A1.501.05
A1.503/
A1.504
A1.104.02
A1.103.073
A1.103.106
A1.103.120
A1.101.70 / A1.101.71