Filter
Top Products
Data sheet
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.El-O-Matic.com or from your nearest Valve Automation Center USA: +1 813 319 0266 Europe: +31 74 256 10 10 Asia-Pacific: +65 6501 4600
www.El-O-matic.com
Sheet No.:
Date: June 2010
A1.101.70 Rev. C
LOW TEMPERATURE ACTUATOR SPECIFICATIONS
-40°C / +80°C
-40°F / +176°F
Silicone
MVQ 70
Sealings
Castrol Optitemp TT1
Low Temperature
Grease
Materials
Part Material Specifications Remark
Housing
Aluminum Alloy UNS A13600, ASTM B85
Drive Shaft
Aluminum Alloy UNS 1 77075, ASTM 7075 T6 Hard anodized
Steel (180° rotation) ETG100 or 42CrMo4V XM Zinc Plated type > P750
Stainless Steel Sandvic 1802, SS2382 or X35CrM017 type > E950
Piston
Aluminum Alloy UNS A03560, ASTM B26
Sealings
Silicone MVQ 70 O-rings -/-
Grease
Castrol Optitemp TT1
-/-
Shaft bearings
Top : Delrin POM
Bottom : Nylatron PA6.6 + MoS2
Piston bearings
PTFE 25% Carbon filled
Bodybearings
PTFE (“P” serie) 25% Carbon filled
Nylatron (“E” serie) PA6.6 + MoS2
Shaft thrust washer
ZEDEX 100 K -/-
End cap bolts
Stainless Steel (“E” serie) AISI 304 A2
Alloy Steel (“P” serie) 8.8 DIN 912
Deltatone
®
coating
Springs
Carbon Spring Steel UNS G10860, ASTM A228
Deltatone
®
coating
Description
A double piston, rack and pinion pneumatic actuator incorporating a three point piston support
system, anti-blowout spindle and with high duty synthetic bearings at all bearing points.
This version is a standard aluminum actuator, but incorporating parts and materials suitable for
low temperature operation.
Note
When operating actuators in sub-zero temperatures (< 0°C or < 32°F) care should be taken to
counter the effects of freezing condensate inside the actuator.
Specification
Max. pressure : 120 psi (8 bar)
Torque : Standard
Media : Air or non corrosive gas
Temperature : -40°F to +176°F (-40°C to +80°C)
Finish : Polyester non-TGIC based powder coating (see data sheet A4.204.01)
Spare parts
Dedicated low temperature spare parts are available for maintenance or make a standard
actuator suiteable for low temperature operation.